Showing all 11 results
-
Hover Head, 2-Pack
$13.993/16 oz Hover Head w/ Owner Super Needle Point 4X strong Zo-Wire Hooks.
3/0 or 4/0 hook size, weedless or non-weedless.
A larger hook that is designed for slightly larger baits and slightly larger line size and leader.
Also featuring Owner #6 100# Micro Hyper Barrel Swivel. Tying your line to a swivel instead of direct line tie on a typical jig head gives your bait the freedom to rock back and forth and it prevents line twist on a dying spiral fall.
These jig heads are designed for hovering your bait above the fish while scoping, but as you will see these unique heads have many applications.
-
Line Thru Bug Head
$11.99 – $17.99Line Thru Bug Head
Our newest Line Thru design is now available….
We have had such widespread success with our Line Thru Grass Cricket, we are now introducing a
new option for anglers who prefer to just flip plasticsMade for plastics or your favorite bug.
Unique line-thru design, where your knot is 100% protected
The line Thru Grass Cricket features an Owner 5/0 Jungle HD Flipping Hook, this Bug head uses the
same hook, but in a 4/0, making it a more compact presentation…a great match up for all of your
flipping plastics.(3) types in 1 oz. and 3/4oz. and in (6) colors
*Titanium weedguard is designed for sub surface grass, (hydrilla and milfoil), sparse mats.
Fiber weedguard is designed for more protection, like wood or thicker grass.Double Fiber weedguard is made for X-treme heavy cover. Like reeds, hyacinths and trash mats.
Everyone knows that while flipping a jig, your hook-up percentage is higher than your traditional
tungsten weight and flipping hook.This head allows you to keep that same advantage. Reason being, flipping a tungsten Texas rig
doesn’t start hooking a fish until the weight comes through the mouth and the plastic is pulled
down, resulting in a lot of fish being hooked right around the edge of the mouth with the hook
exposed, barely hooked…not a good thing in heavy cover!With the Bug Head, the hook turns around immediately and compresses the weed guard, which
results in more fish hooked deeper in the mouth.With our Line Thru design, you can use your favorite weight stop, but we suggest you use the uniquely designed, tapered Mustad weight stops for 100% line protection.Our Line Thru Swimbait heads, Grass Crickets and Bug Heads take the 6mm size.Because of the angle of the line thru design, your bug or craw will always swim naturally…Not to
mention you will save so much money on plastics with our oversized screw lock
Each package will contain (1) Bug Head and (1) Owner Hyper Wire #4 split ring -
Line Thru Finesse
$12.49 – $16.99Line Thru Finesse
Following the same concept as our Line Thru Swimbait Heads, the Finesse version will have the same advantages and even more while using light line. You will know your knot is totally protected from abrasions such as teeth marks.
It is the only jig head you will ever need for “FFS/Scoping”, because of its customization options!
Rigging option ideas are as follows,
*Single bait fish or minnow, finesse Swimbait
*Adding a belly stinger treble to the bottom split ring
*Tying a small leader to the split ring and moving your stinger hook further back towards the tail for short striking
*Connecting a swivel or blade, or just clip on an Owner Flashy Swimmer…in 10 seconds you will turn your jig head into an underspin.
*With the included split rings and swivel, you can fish multiple swimbaits by simply.
*Adding a leader and tying together. For the best results, put your heavier jig head on the bottom.
*This also allows you to combine weights for your desired fall rate or reaching your desired depth.
*the jig heads have identifying weight stickers and XL realistic eyes
Possibilities are endless…With our Line Thru design, you can use your favorite weight stop, but we suggest you use the uniquely designed, tapered Mustad weight stops for 100% line protection.Our finesse heads take the 4mmThe Finesse heads come in a (2) pack of (3) different weight sizes of 3/16 oz., ¼ oz. and 5/16 oz.
And a special (3) pack of each size!
(2) packs include,
(2) Jig heads w/
Owner Black Chrome Finish, Super Needle Point #1 hook
(2) Owner Hyper Wire Split Ring size #2 37# test
(1) Owner Micro Hyper Swivel-Barrel Type #8, 80# Strong
(3) packs include,
(3) Jig heads w/
Owner Black Chrome Finish, Super Needle Point #1 Hook
(3) Owner Hyper Wire Split Rings #2, 37# strong
(2) Owner Micro Hyper Swivel-Barrel Type #8, 80 # strongThe sizes available will be,
(2) pk 3/16 oz
(2) pk ¼ oz.
(2) pk 5/16 oz.Price is 12.99/2 PACK
(3) Pack will have all (3) weight jig heads.
Price (3) pack 15.99 -
Line Thru Swim Cricket
$10.99 – $16.99Line Thru Swim Cricket
We have had such widespread success with our Line Thru Grass Cricket, we are now introducing a new option for anglers, the Line Thru Swim Cricket!
The ONLY jig available with Owner Jungle Flipping H/D 4/0 & 5/0 Hook
Featuring A baby skirt cut from ultra soft, superfine silicone – creates super undulation
Line thru design
Recommended Mustad 6mm weight stop
-
Line-Thru Grass Cricket
$19.99Designed and used by Tim Reneau of Reneau Tackle for over 10 years. 30 years of experience flipping grass led to the uniqueness of the line thru design.
Just this year, Tim and partner Stephen Johnston put the grass Cricket to work winning the 2024 Texas Team Trail Championship on Toledo Bend, then right after that, he and partner Bryan Hoffman finished 3rd in the Brandon Belt Championship on Toledo Bend
Notable features of the Grass Cricket;
The uniquely designed angled slot will not allow your knot to touch the base of the head, protecting your line. Using your favorite weight stop, we recommend the Mustad weight stops in 6mm, put line through the jig and tie it to the Owner Hyper Wire #4 split ring that is included in the packet. Pull the weight stop down to the nose of the jig tightly and you’re ready to go.
- Reasoning behind the line thru design is to protect your knot in your line and there is no exposed knot to catch on grass and slow down the fall rate.
- Titanium Weed guard. (2) #100 lb. strands of titanium wire is steel epoxied in the head close to the point of the hook so grass wont go between the weed guard and hook. Also, featuring a 45-degree epoxied “balls” on the end of the wire, keeping your line from catching on weed guard.
- These #100 strands have zero drag falling through the grass, unlike the traditional thick fiber weed guards have. (the #100 lb. strands also press against the roof of the fish mouth and keeps them pegged)
- “Reneau” designed and approved grommeted skirts added to compliment the hand painted jig heads
- The only bass fishing lure with very unique eyes showing the weight of the jig.
- This jig is the first ever jig made with the Owner 5/0 Jungle HD Flipping hook…the “baddest” hook in bass fishing!
With our Line Thru design, you can use your favorite weight stop, but we suggest you use the uniquely designed, tapered Mustad weight stops for 100% line protection.Our Line Thru Swimbait heads, Grass Crickets and Bug Heads take the 6mm size.Comes with (1) Owner Hyper Wire #4 Split Ring and jig is skirted to compliment the painted head.
-
Line-Thru Swimbait Heads
$14.99Advantages of the new Reneau Tackle Line-Thru Jig-head System vs. Traditional Line Tie Jig Heads
Traditional Line Tie Jig Heads
- The knot is in front of the bait, totally exposed to abrasion from rocks, brush, fish teeth marks, etc.
- Improper cleaning of the Paint and clear coating, prior to tying can damage your knot, without you being able to detect it.
- Traditional line ties stick up and it can cause it to “catch” on lip of fish, possibly causing the jig to roll side to side and possibly compromising the hook up.
- Movement to your knot, on the lie tie during normal fishing and catching situations, causes your knot to slide back and forth, causing friction, damaging your knot.
- Perfectly designed line thru angle, which allows your swimbait to swim flat and horizontal, even with multiple baits
Pics will show heads in all 4 sizes and some suggested rigging ideas
Use your favorite weight stopper, we like and suggest the Mustad weight stops in 6mm. They will be available here for purchase in the near future.
When fishing a double or triple Swimbait head, we suggest you tie the lightest head in front and the heaviest behind.
FEATURING
OWNER SUPER NEEDLE POINT,
SILKY GRAY FINISH
ZO-WIRE
JUNGLE 60-degree JIG HOOK-4X
IN 3/0 & 4/0
¼ oz., 3/8 oz. and ½ oz. has the 3/0 hook
¾ oz will have the 4/0 hook.
Each packet will contain (2) Line-Thru Swimbait Heads
Inside the package will be,
(2) OWNER Hyper Wire Split Rings size #4, #50lb strong recoil,
(1) OWNER Micro Hyper Swivel-Barrel Type #100 lb.
-
Minnow Helmet
$9.99Minnow Helmet
An innovative hover strolling jig head built to meet the demands of live sonar anglers, the Reneau Tackle Minnow Helmet Jig Heads is designed with a unique helmet head and proprietary alloy. Engineered with 90% of the weight above the shank of the hook, the concave portion rests on top of your bait resulting in a slow side-to-side rolling action on your favorite soft plastic minnow. The helmet shape not only simplifies the rolling action for the angler but also protects the minnow from being pulled down or “wadded” up in the bend of the hook.
Boasting a higher tensile strength than lead and 25% lighter per size, Helmet Jig Heads give anglers an increased surface area above the minnow, resulting in a much clearer return with live sonar. A wire keeper on the bottom secures all types of plastics, and unlike other jig heads with a 90-degree line-tie, the Helmet Jig’s recessed line tie creates an unobstructed hook-up. Complete with a Gamakatsu Nano Alpha hook coating that’s twice as slick as traditional finishes for improved penetration, the Reneau Tackle Minnow Helmet Jig Heads come in versatile sizes and offer an incredible hook-up ratio.
- TW exclusive
- Recessed line-tie
- Gamakatsu Nano Alpha 90-degree jig hook
-
Mustad Weight Stops
$2.29MUSTAD Weight Stops
We currently have the 4mm size for the Finesses, still waiting on the 6mm for the Line Thru Swimbaits
-
-
-
